Remove the PciRoot(0x0)/Pci(0x1b,0x0) from the list Kernel BooterĬhange the items in red Device Properties In the following ist configuration, I will skip the sections that are not required to be modified or double-checked. It will take time and do not skip any lines.įrom the ProperTree, go to File > OC Clean Snapshot to read our OC files and merge the information in the OC folder to out ist file automatically. Now we will go through this file for each section. And then open the ist from the EFI partition in the USB installation drive. If you are running macOS, you can use the ProperTree software to edit the ist file. First, copy the ist from the OpenCore-0.6.3-RELEASE folder under the Docs subfolder.Ĭopy the ist to the EFI>OC folder. Configure istĪfter collecting files, now we are ready to configure the ist. SSDT’sįor my particular built and other AMD Ryzen desktop, we need the following SSDT. Now, my Kexts folder will looks like this C. CtlnaAHCIPort (Without this, my M.2 Western Digital SSD will not visible during installation).RealtekRTL811 (Check your motherboard to know the network card you may have).For my particular build, I would have the following kexts: So, the solution is to use the VBoxHfs.efi instead of HfsPlus.efi B. So now, the Drivers folder will looks like thisīut, in my case, this HfsPlus.efi does not work. No matter if you are running AMD or Intel, you must have the following driver.ĭownload the HfsPlus.efi and then save it in the EFI>OC>Drivers folder. The following files are required by OpenCore to boot. Here are the files needed for this AMD Ryzen Big Sur Hackintosh. Please note that if you have a different system, the files you need to download and put in the EFI folder will be different. Now we are ready to put some files into our EFI folder. Gathering Files for Big Sur Hackintosh on AMD Ryzen Now the cleaned EFI folder will looks like this Step 3. Remove all files inside the Tools folder. So now only one file which is OpenRuntime.efi file should remain in the Drivers folder. We need to delete some files from the Drivers folder. Now, open the EFI folder in the EFI partition of your USB installation drive. So now your EFI partition will looks like this Step 3. You can use Clover Configurator software to mount the EFI partition on the USB installation drive.Ĭopy the EFI folder from the OpenCore folder, and then paste directly to the EFI partition. Extract the file and then copy the EFI folder to your EFI partition in the USB installation drive.

Once you download it, you will get a zip file called OpenCore-0.6.3-RELEASE.zip. You can choose to use the DEBUG version or RELEASE version. When I wrote this article, the latest OpenCore 0.6.3 is available and can be downloaded from the link below. Create macOS Big Sur USB Installer from Windows 10 Step 2.

Bigsur hackintosh